|
Product Details:
Payment & Shipping Terms:
|
High Light: | multimode fiber converter,fibre media converter |
---|
Single-mode 460Kbps Fiber to Serial Converter , RS-485 / RS-422
Interface:Supports RS-232/RS-485/RS-422 interfaces
Asynchronic transmission:point-to-point with a rate as high as 460KBPS
Working wave length:1310nm (multi-mode) and 1310nm(single-mode)
Fiber interface:SC interface (other interface can be ordered ST/FC)
Applications:
Interface |
Support RS-232/RS-485/RS-422 interfaces |
Asynchronic transmission |
point-to-point with a rate as high as 460Kbps |
Transmission distance |
4,000 meters for multi-mode and 20,000 meters for single-mode. 40,000 meters can be customized |
Working temperature |
-40℃ to +85℃, relative humidity from 5% to 95% |
Working wave length |
1310nm (multi-mode) and 1310nm (single-mode) |
Electric interfaces |
RS-232: pole-shaped connector. RS-485/422: pole-shaped connector |
Fiber interface |
SC interface (other interface can be ordered ST/FC) |
RS-232 interface features |
Standard RS-232 three line interface ±15KV(anti-static), ESD protection, maximum rate of 115.2Kbps. Input voltage DC9-48V@200mA |
RS-485/422 interface features |
Self-adaptive interface technology enables the self adaptation of rate regulation from interface, no switch needed, and the ±15KV(anti-static) ESD protect supports as much as 32 points of polling. And 600W surge protection each line for RS-422 and RS-485 interfaces. |
Connector and signal
Connector (PIN) |
Signal |
RS-422Full-duplex |
RS-422Full-duplex |
1 |
T/R+ |
Send(A+) |
RS-485 (A+) |
2 |
T/R- |
Send(B-) |
RS-485 (B-) |
3 |
RXD+ |
RXD(A+) |
N/C |
4 |
RXD+ |
RXD(B-) |
N/C |
5 |
TXD |
RS-232(Send) |
|
6 |
RXD |
RS-232(RXD) |
|
7 |
GND |
RS-232(GND) |
|
8 |
VCC |
Power input (DC9-48V) |
|
9 |
GND |
GND |
|
10 |
ETH |
ETH |
|
Being a multi-function fiber modem in support of asynchronism RS-232,RS-485 and RS-422 communication interface, UT-2578 is the best choice for the connection from remote terminal unit (RTU) to host(HOST) or Supervisory Control and Data Acquisition (SCADA).It supports multiple asynchronism communication protocols including RS-232, RS-485 and RS-422, and it also supports a combination of two of the RS-232,RS-485 or RS-422 interfaces as well as both of the working modes, i.e. Two-line(half-duplex) RS-485 and four-line(full duplex) RS-422.The ability to support RS-485 mode for data TXD or SD sending control greatly improves its compatibility with various kinds of software besides a sharp simplification of control method. Various kinds of fiber connection between asynchronism serial interfaces are supported by UT-2578 fiber modem. Both half duplex and full duplex communications through fiber between two asynchronism interface devices are supported with a communication distance as far as 4 kilometers for multi-mode and 20 kilometers for single-mode. The transmission rate for RS-232 can reach a maximum of 115.2Kbps, while for RS-485/RS-422 a maximum of 460KBPS can be achieved. Interfaces of different electric standards can be mixed for use with nice EMI/RFT performance, e.g. RS-232 devices can be connected to RS-485/RS-422 devices, and the interface converter or photoelectric isolator can be replaced from RS-232 to RS-485. Two data signal transmissions are supported by UT-2578: data sending and data receiving. At the same time, automatic control circuit is also provided for RS-485/RS-422 data transmission. Zero delay for converting time is achieved. ST interfaces are used for fiber connection.
Contact Person: Mr. Brandy Xie
Tel: +86-755-27886063 Ext.602
Fax: 86-755-27886083