Half Duplex Mode ethernet fiber media converter , industrial media converter 1 TCP / IP Port

Half Duplex Mode Fiber Optic Media Converter , 1 TCP / IP Port

Performance parameters
1. It uses a high-quality photoelectric integration module to provide good optical properties and electrical properties to ensure reliable data transmission, with a long working life.
2. Support full-duplex or half duplex mode, and with auto-negotiation capability.
3.10 Mbps and 100Mbps auto-adapt.
4. Ethernet ports support automatic cross-identification.
5. With store and forward mechanism, cache 1MB, support for multiple protocols.
6. Support the maximum transmission packet size of 1600 bytes of data.
7. in line with carrier-class operating standards, MTBF 50,000 hours or more.
8. Power Supply: DC9-48V/500mA
9. use the SC fiber optic connector (ST, FC interface can be optioned)
10. surge protection: 3000V (power supply)

Technical standards

Support the IEEE802.3 Ethernet, IEEE802.3 U Ethernet protocol standard

1. The technical parameters:

2. the optical fiber connection parameters

① transmission fiber

Multimode: 50/125, 62.5/125, 100/140μm

Single-mode: 8.3/125, 8.7/125, 9 / 125, 10/125μm

② transmission distance

Multi-mode: 5km

Single-mode: 20km, can be customized according to user needs 40Km, 

60Km, 120km.

Connection cable UTP5 class lines: 100m

Description:

10/100M fiber optic transceiver used for 100Base-TX twisted pair and 100Base-FX fiber optic cable or data communication between 10Base-T twisted pair and 10Base-FL fiber optic cable. Auto-adapt 10/100Mbps, easy to upgrade. It can extend the limit of the network transmission distance from100M of the twisted-pair to 100KM above. It can easily achieve the interconnection among the motherboard servers, repeaters, hubs, terminals and terminal.


 

Side panel view