10 / 100TX to SC Fiber Optic Media Converter - 1 TCP / IP Port

10 / 100TX to SC Fiber Optic Media Converter - 1 TCP / IP Port

Specifications:
Performance parameters
1. The quality optical integration module provides excellent optical and electrical properties. It ensures reliable data transmission and long working life.
2. It supports both full-duplex and semi-duplex modes, and it also possesses auto-negotiation capability.
3.10Mbps and 100Mbps adjust automatically. No manual adjustment required.
4. Electrical interface supports fully automatic cross-identification. No manual operation required.
5. Built-in store and forward mechanism, cache 128KB, supports multiple protocols.
6. Support maximum transmission data packets of 1600bytes
7. Conform with carrier-class operating standards, average 50,000+ no-error operation hours.
8. Power supply: DC5V Input 1A
9. SC fiber optic interface (ST or FC interface optional)

 

Appearance Description
DIP Switch:
● When DIP switch 1 is set to “OFF”, switch and switch are not in operation mode. Switch 2 and 3 can only be configured when Switch 1 is set to “NO”.
● When DIP switch 2 is set to “OFF”, the electrical interface opearting rate is at 100M; when set to “NO”, the interface operating rate at 10M.
● When DIP switch 3 is set to “OFF”,the electrical interface is at full-duplex operation status; when set to “NO”,the interface is at semi-duplex operation status.
● When DIP switch 4 is set to “OFF”,LFP function is banned; when set to “NO”,
LFP alarm function is then activated. LFP function is used to detect the connection between optical and electrical interfaces. When remote optical or electrical interface is disconnected, it notifies and disconnect the corresponding local optical or electrical interface, and the indicator will be off. This helps technicians to quickly identify the point of connection error.

 

Side panel view

Support the IEEE802.3 Ethernet, IEEE802.3 U Ethernet protocol standard

1. The technical parameters:

2. Fiber connection parameters

①  Transmission fiber optic

Multi-mode:50/125,62.5/125,100/140μm

Single-mode:8.3/125,8.7/125,9/125,10/125μm

②  Transmission Distance

Multi-mode:5km

Single-mode:20km,40km,60km,is user requires.

Connection cable UTP5:100m]

Description:   

The 10/100M fiber optic transceiver is used for data communication between 100Base-TX twisted pair and 100Base-FX cable, or between 10Base-T twisted pair and 10Base-FL cable. It is the most suitable for the connectors between intelligent community, or fiber optic, and the desktop. It automatically adjusts 10Mbps and 100Mbps transmission speed, and it makes user upgrades more convenient. It enhances the network transmission distance from the limited 100M twisted pair to more than 100KM. It simply realizes the interconnection between server motherboard, repeaters, hubs, and terminals.